KAUST researchers found that sulfate ions reduce free water in aqueous batteries, mitigating parasitic reactions that degrade the anode and shorten battery life. Adding zinc sulfate increased battery lifespan by more than ten times. Sulfate salts stabilize the bonds of free water, acting as a "water glue" to reduce parasitic reactions. Why it matters: This finding provides a cheap and scalable approach to improve the viability of aqueous batteries for sustainable energy storage, particularly for integrating renewable energy sources.
KAUST researchers, in collaboration with KACST, discovered that dissolving nylon in battery electrolytes improves the performance of lithium-metal batteries. The nylon additive resulted in more efficient batteries with longer lifespans and fewer unwanted reactions. The research was published in ACS Energy Letters and Energy Environmental Science. Why it matters: This promises cheaper, safer, and more powerful lithium batteries for applications in electric vehicles and aviation, supporting Saudi Arabia's renewable energy goals.
KAUST researchers have developed a passive cooling system that uses solar energy to evaporate water and regenerate salt for reuse, achieving temperatures as low as 3.6 degrees Celsius. The system uses ammonium nitrate (NH4NO3) due to its high solubility and low cost. The crystallized salt stores solar energy and can be reused for cooling when needed. Why it matters: This off-grid design offers a sustainable and inexpensive cooling solution for communities in hot regions with limited electricity access, addressing a critical need exacerbated by climate change.
KAUST researchers contributed to an international collaboration demonstrating that an ionic salt molecule called CPMAC enhances perovskite solar cell performance by 0.6%. CPMAC improves the electronic properties and reduces defects in the electron transfer layer compared to C60. CPMAC solar cells also exhibited greater stability, with a one-third reduction in power conversion efficiency drop compared to C60 cells under heat and humidity. Why it matters: This advancement addresses a key limitation in perovskite solar cell stability, potentially leading to more efficient and durable renewable energy solutions.
Researchers at KAUST, Fraunhofer ISE, and University of Freiburg developed a method using 1,3-diaminopropane dihydroiodide (PDAI) to treat the perovskite surface of perovskite silicon tandem solar cells. The treated solar cells achieved a conversion efficiency of 33.1% and an open-circuit voltage of 2.01 volts. The devices maintained performance at over 40°C for over 1500 hours along the Saudi coast. Why it matters: This innovation overcomes challenges in surface passivation of textured perovskite cells, paving the way for more efficient and stable solar energy solutions suitable for deployment in hot climates.